When it comes to Halloween party, it is all fun. One of the most well liked events of Halloween is carving pumpkin. Before you buy or pick your Halloween pumpkin from the local pumpkin shop, you first need to plan the pumpkin design. You can as well take the easy way out and but readily available pumpkin patterns, or you could further design your own.

Buying good pumpkin

The pumpkin's shape and size would decide what type of patterns and drawings you could use to it. If you are using pumpkin carving design then it is necessary to buy a pumpkin, which matches the stencil's size and requirements. If you don't plan on using a stencil then makes certain that your Halloween pumpkin is tall and huge enough for the sketchy design that you are carrying in your mind.

Look for a pumpkin that's not excessively ripen. It needs to be in the right color orange and not have any squashy spots or bruises. Look for a strong stem and you should never, ever lift the pumpkin by the stem. Sturdy or not, it's a small trip from "nice Halloween pumpkin" to splat.

Hold the pumpkin nicely and then smell it around the stem and top. If in case it smells very strong and "pumpkiny" then there is a possibility that it's too ripe, pass it up and hunt for another. Thump the pumpkin and pay attention for a solid "thunk". A void sound could be of bad news. Carry your Halloween pumpkin cautiously and move it home safely. A black-and-blue pumpkin rots very fast and may not make it during the Halloween season.

Preparing process

1. Cut a circle properly around the top of the pumpkin with no damage on the stem.

2. Remove the top stem and put aside.

3. Remove and throw away the pulp and seeds unless you would like to make Vampire Fingernail snacks for your Halloween party.

4. With a soft knife or same scraper, quietly scrape down the inside of the pumpkin to take away any moist flesh adhering to the sides. Be careful not to harm the wall of the pumpkin.

Next step is pumpkin stencil

1. Wipe the outside of the Halloween pumpkin so that it is empty of dust and any other foreign material. If you require wiping it down with a wet rag, permitting it to become methodically dry before moving on to the next step.

2. Tie the stencil to the side of the Halloween pumpkin, which you have selected to be the face. Tie the top left area first, then the top right, bottom left and only then bottom right. Bring the stencil out as you are tying the same.

3. Using an ice pick or a locate punch tool, slowly poke holes through the stencil and then into the pumpkin. Follow all the lines of the stencil cautiously. It' is simply like playing connect-the-dots games.

4. Check cautiously to make certain that you have moved the whole pattern and then take away the stencil. Keep the stencil practical to refer to in case you get puzzled while cutting.